Yard-Man Lawn 13875-8 Mower Manual

The Yard-Man Lawn 13875-8 is a reliable and efficient lawn mower designed for residential use. It features a powerful engine, adjustable cutting heights, and a durable build to ensure a clean cut every time. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 21-inch cutting deck, adjustable height settings, easy-start engine, and ergonomic handle design.

FeatureDescription
Cutting Deck21-inch wide for efficient mowing
Height Adjustment5 height settings for customized cutting
EnginePowerful 140cc engine for reliable performance
HandleErgonomic design for comfortable use
Grass BagLarge capacity for less frequent emptying

Installation

Unpack the mower and check for all components. Assemble the handle and attach the grass bag.

  1. Attach the handle: Align and secure with provided screws.
  2. Install the grass bag: Hook onto the rear of the mower.
  3. Check oil level: Ensure proper oil is added before starting.
  4. Fill with fuel: Use unleaded gasoline as specified.

WARNING! Always check for loose parts before operation.

First-Time Setup

Prepare the mower for first use by following these steps.

  1. Check all connections: Ensure everything is securely attached.
  2. Adjust cutting height: Set to desired level for initial mowing.
  3. Perform a test run: Start the mower and let it idle for a few minutes.

CAUTION! Keep hands and feet away from the cutting deck while starting.

Specifications

Controls and Settings

Access the throttle control and height adjustment lever located on the handle.

Throttle Control: Adjusts engine speed for optimal performance.

Height Adjustment Lever: Easily change cutting height with a single lever.

Connecting Devices

Ensure all connections are secure before starting the mower.

  1. Check fuel and oil levels before each use.
  2. Inspect the blade for damage or wear.

Tip: Always use fresh fuel for best performance.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

  1. Start the mower: Pull the starter cord firmly.
  2. Begin mowing: Walk at a steady pace, guiding the mower.
  3. Adjust speed as necessary: Use the throttle control for speed adjustments.
  4. Stop the mower: Release the handle to engage the safety feature.

WARNING! Never leave the mower unattended while running.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the blade: Sharpen or replace as needed.
  3. Change oil regularly: Follow the schedule in the manual.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startFuel or oil issuesCheck fuel level and oil condition.
Uneven cutBlade height or dull bladeAdjust height or sharpen blade.
Excessive vibrationLoose parts or damaged bladeTighten screws or replace blade.
Grass clippings not baggingClogged chuteClear any obstructions in the chute.

Reset: Refer to the manual for reset procedures if applicable.

Service: For assistance, contact customer service.

Yard-Man Lawn 13875-8 Mower Manual © - All Rights Reserved 2026