Yard-Man Lawn 2510-2-6 Mower Manual

The Yard-Man Lawn 2510-2-6 is a reliable and efficient lawn mower designed for residential use. It features a powerful engine, adjustable cutting heights, and a durable build to ensure a well-manicured lawn. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 21-inch cutting deck, adjustable height settings, ergonomic handle, and easy-start engine.

FeatureDescription
Cutting Deck21-inch wide for efficient mowing
Height Adjustment5 height settings for customized cutting
EnginePowerful 160cc engine for reliable performance
Ergonomic HandleComfortable grip for ease of use
Grass BagLarge capacity for less frequent emptying

Installation

Unpack and inspect contents. Assemble the mower according to the instructions.

  1. Attach the handle: Align and secure with provided bolts.
  2. Install the grass bag: Ensure it is properly fitted.
  3. Check oil levels: Fill with recommended oil if necessary.
  4. Fill the fuel tank: Use fresh gasoline for optimal performance.

WARNING! Always wear protective gear when operating the mower.

First-Time Setup

Power on the mower; follow the setup instructions.

  1. Check all connections: Ensure everything is securely attached.
  2. Adjust cutting height: Set to desired level before mowing.
  3. Start the engine: Follow the starting procedure outlined in the manual.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access controls via the handle: throttle control, engine stop, and height adjustment lever.

Throttle Control: Adjusts engine speed for different mowing conditions.

Height Adjustment Lever: Easily change cutting height while mowing.

Connecting Devices

No external devices are required for operation.

  1. Ensure the mower is fueled and oiled before starting.
  2. Check that the grass bag is securely attached.

Tip: Always inspect the mower before each use for safety.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

  1. Start the mower: Follow the starting procedure.
  2. Begin mowing: Move at a steady pace for even cutting.
  3. Adjust speed as needed: Use throttle control for different grass conditions.
  4. Stop the mower: Release the throttle to stop the engine.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Check oil levels regularly and change as needed.
  2. Clean the cutting deck after each use.
  3. Inspect and replace the air filter annually.
  4. Sharpen blades at least once per season.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startFuel issueCheck fuel level and quality; ensure choke is set correctly.
Uneven cuttingBlade issueInspect blades for damage; sharpen or replace as necessary.
Excessive vibrationLoose partsTighten all screws and bolts; inspect for damage.
Grass clippings not baggingClogged chuteClear any debris from the discharge chute.

Reset: Refer to the manual for specific reset instructions.

Service: Contact customer support for further assistance.

Yard-Man Lawn 2510-2-6 Mower Manual © - All Rights Reserved 2026